Category Archives: Services

Consumer Electronics, Electronic Components, Electronics, Services

A Few Things To Consider While Repairing a Macbook

Leave a comment
Closeup shot of unrecognizable man fixing circuit board in laptop using screwdriver and different tools on table in workshop

Middleboro, Massachusetts, 2022-Oct-10 — /EPR ELECTRONICS NEWS/ — A Macbook device plays a very important part in our lives. These MacBooks are known for their extraordinary performance, their high configuration and their extremely fast speed. Nowadays, people have become so dependent on laptops that they can’t imagine a single day in life without using their laptops. They panic when they lose sight of their laptops for even a few hours. This has become really important to ensure that the Macbook remains functional at all times.

However, just like any other device, the Macbook may sometimes get damaged. In such a situation, getting the macbook pro 2012 logic board repaired becomes the number one priority so that the desired solution can be obtained. So, here are some of the most important factors that require consideration while repairing the smartphone:

Fixing a Cracked or Broken LCD Screen: 

Often, the Macbook device may suddenly drop off the hands of the owner. This can cause the LCD screen to get cracked. Other than that, sometimes, while trying to close the lid of the Macbook with too much force, the screen may get cracked. Sometimes, the screen may get damaged for unknown reasons that even the owner is unaware of. In such a case, it becomes really important to get the LCD screen repaired to start functioning again.

Without a properly repaired LCD screen, it would be impossible to use the Macbook any longer. While repairing the LCD can easily be done from a local computer repair store, it is not advisable at all. They basically make use of cheap spare parts that are of low quality. The l Macbook is also handled by untrained technicians who hardly have any knowledge of the overall configuration of the Macbook. So, it is always a better idea to get the LCD repaired from a reputable Apple store only so that the screen can be replaced properly and the Macbook starts to function all over again.

Problem with Viruses And Malware: 

Many times, the Macbook device may get attacked by malware and viruses which can put the security of the owner at complete risk. Sometimes, even the data gets corrupted and stolen. In order to avoid such situations, it is always important to get updated firmware and software for the Apple device. This can reduce the security risk. An updated software also comes with various additional security features. This will ensure that the laptop device remains protected at all times and the users will also face no problem in working on their laptops.

Dealing with damaged logic boards: The logic board is the most important component of the laptop. Without a properly functioning logic board, it becomes really difficult to make proper use of the Apple Macbook. So, in case there is any kind of problem with the Macbook, it is really important to ensure that the logic board is functioning properly.

In case the macbook pro a1706 logic board is non-functional, then it is a good idea to replace the logic board only instead of placing the entire Macbook. It is also quite inevitable to get reliable logic boards repaired or replaced really soon as it will determine how the entire Macbook is going to perform and no compromises should be made on the quality of the logic board.

The Accessories are not Working: 

Sometimes, the laptop accessories may stop functioning. The speaker of the laptop may get damaged or the keyboard may not be functioning any longer. In that case, also, the laptop owner can get quality parts for their laptop so that the laptops become functional all over again.

In this case, many people believe that it would not be a good idea to spend a lot of money on accessories. However, this is not the case. Every single part has got an equally important role to play in ensuring that the laptop functions properly. So, it is a really good idea to get genuine accessories for the laptop so that it starts functioning all over again.

In this way, the Macbook device can be given proper maintenance and the laptop will keep functioning at all times. The a1706 logic board will also remain functional.

Via EPR Network
More Electronics press releases

Electronics, Enterprise, Sensors, Services

SkyRFID Inc. announces new USA incorporated firm, SkyRFID, LLC

Leave a comment

Lansdowne, Virginia, United States, 2022-Jan-19 — /EPR ELECTRONICS  NEWS/ — SkyRFID Inc. recently completed the transfer of assets and management from Canada to the U.S.A. advancing the support of U.S. customers, including the U.S. government. Long-time technology and equity partners, Geoff Dewhurst and Tim Shinbara, received approval from their respective Boards to continue the 30+ years of SkyRFID development, fulfillment, and operations from within the U.S. in early 2020 and founded SkyRFID, LLC in Lansdowne, Virginia in November of 2020. For SkyRFID, Inc., 2021 was a winddown and dissolution period. The two partners will continue to operate SkyRFID, LLC with Mr. Shinbara being named CEO and President and Mr. Dewhurst retaining Chief Architect duties and responsibilities.

Having merged the talent and resources from Mr. Shinbara’s ventures and experience into SkyRFID, LLC the firm will now be headquartered and operated from Lansdowne, Virginia, U.S.A. The Canadian dissolution transferred all assets from Ontario-based SkyRFID, Inc. to the new Virginia-based SkyRFID, LLC.

All Global Sky Partner channels conveyed to SkyRFID, LLC as well as current contracts, purchase agreements/orders, and projects which will all be subject to US and Virginia laws and policies as applicable.

SkyRFID, LLC continues the decades-long operation of solving asset management challenges, covering more than 135 countries. Solution integrations will continue to include NFC, RFID, RTLS, Wi-Fi, and IoT-based communication protocols and may support further interoperability with mobile cellular protocols such as GSM, GPRS, HSPDA+, 4G-LTE, and upcoming 5G protocols.

About SkyRFID, LLC
SkyRFID, LLC, the leader in Dynamic Asset Management, has become the “go-to” resource for security and tracking for real-time management of high-value, critical assets.

Having 30+ years of continuous improvement toward providing full scope capability, SkyRFID’s differentiation is realized in our consistent and reliable quality, optimal-cost hardware components end-to-end real-time tracking and reporting solutions; all which include our global consulting team supporting multiple industry verticals.

With its established global network of engineers, consultants, resellers, and system integrators, SkyRFID has become the premier partner for developing, implementing, and managing enterprise solutions.

SkyRFID assists at any or all levels from technical design to implementation of hundreds of RFID, sensor, and IoT technology projects each year, using its Global Sky Partner channel of over 500 companies in more than 135 countries to service local implementations and support.

For more information visit: www.SkyRFID.com

For sales information contact SkyRFID, LLC at +1 571-512-5262
E-mail: sales@skyrfid.com

Via EPR Network
More Electronics press releases

Electromechanical, Electronic Components, Electronics, Electronics & Electrical Components, Electronics & Electrical Instrumentation, Electronics Design, Power Supplies, Semiconductors, Services

MinDCet, FTEX announce the development of the first gallium nitride-driven Dynamic Drive

Leave a comment

LEUVEN, Belgium, 16-Nov-2021 — /EPR ELECTRONIC NEWS/ — MinDCet, a leading semiconductor house specializing in power and high-voltage IC design, announced the development of the first GaN-driven Dynamic Drive along with FTEX, the renowned specialist in precision motor control systems using gallium nitride (GaN) transistors.

FTEX develops variable DC bus motor drives for EVs which have been shown to play a significant role in increasing range and power of EV powertrains. However, legacy silicon DC-DC converters are too large to be integrated in an EV powertrain, taking up space otherwise used for batteries. Having the possibility to drastically increase the power density of a DC-DC power converter enables multiple architectures not previously commercially viable.

FTEX finds solutions to these problems by implementing novel topologies and gallium nitride transistors to overcome the size and efficiency issues of variable DC bus powertrains. GaN power transistors have multiple key advantages, such as lower On resistance compared to state-of-the-art silicon equivalents and very sharp commutations that enable high-frequency power conversion and ideal waveform generation. Provided they are designed and driven effectively, this technology can drastically reduce the size of DC-DC converters while maintaining ultra-high-efficiency operation.

FTEX is leaning on the high-performance gallium nitride transistors offered by EPC driven to their full potential thanks to the high-performance MinDCet MDC901 drivers. “With its advanced capabilities and flexibility by design, this single driver can achieve high-performance in various applications, either for power conversion or motor control,” said Alexandre Cosneau, CTO of FTEX. “Exclusive features such as charge pumps, 5V to 6V gate drive voltages, and advanced thermal dissipation allow this driver to get the best out of the EPC GaN transistors, for example. Considering the safety of the power conversion system, a shoot-through event, one of the worst failure scenarios that can occur in a half-bridge, can be greatly prevented by MinDCet’s driver, thanks to its numerous fail-safes.”

The gate driver precision and control directly influence the reliability and efficiency of the system. The gate driver controls the behavior of the half-bridge output, known as the switching node. By generating a near perfect waveform at the switching node, harmonics within the magnetic elements are minimized, resulting in very low losses. These harmonics arise from the over-/under-shoots and their subsequent ringing during commutation transitions, where harmonics are simply wasted energy and damage the circuitry over time. “Driving GaN transistors in a robust and reliable way requires a specifically developed gate driver,” explained Jef Thoné, CTO at MinDCet. “You want to maintain a perfect gate voltage control under high slew-rate conditions to ensure a long lifetime for your GaN power stage.”

The combination of EPC GaNs and the MinDCet driver allows FTEX to effectively use its expertise to design and implement high-performance algorithms and control methods to deliver a DC-DC converter with up to three times the power density compared to the existing state-of-the-art. The result is the FTEX Dynamic Drive, a high-performance, ultra-compact, variable DC bus motor drive that has been shown to provide up to 30% more range and power in a commercially viable, cost effective solution.

SOURCE:  EuropaWire

Consumer Electronics, Electronics, Printers, Services

Printek Launches VP420 Mobile Printer Series

Leave a comment

St. Joseph, Michigan, USA, 2019-Jun-14 — /EPR ELECTRONICS NEWS/ — PrintekMobile, an industry leader for reliable, innovative, on-the-go rugged mobile printers, has announced the launch of its NEW and updated VehiclePro 420 Mobile Thermal Printer Series. The VehiclePro VP420 Mobile Printer is a newly designed and updated in-dash or center console mobile printer built off the success of the prior VP400 Mobile Printer Series. It is the only mobile printer designed specifically for police, and fire department applications for ticket printing, rip and runs, driver information exchange, and more. The VP420 Mobile Printer is designed to install quickly and easily, directly into a vehicle’s dash or center console to significantly save space in your department’s vehicles. There is no need to buy extra mounting equipment or compromise your vehicle interior by using up additional cabin volume with a general purpose mobile printer.

With public safety vehicles in mind, PrintekMobile’s VehiclePro 420 boasts many benefits specific to mission-critical demand and use. The “easy-to-read” control face and simple drop-in paper loading makes operation and maintenance very simple – even while in emergency situations. The VP420 is a portable printer that is tough, rugged and IP54 rated for water and dust resistance, complete with durable metal case consistent with heavy duty Police/ Fire/Rescue equipment.

The VP420 Mobile Printer install is quick and easy, as mounting faceplates are available for most popular console brands. One cable supplies both power and data, and optional Bluetooth and Wi-Fi connectivity is available. The VP420 is easy-to-integrate, with simple web-based setup tools and Windows drivers. It is compatible with iOS, and Android SDKs are available. Conveniently operate the door latch, drop-in paper bay, paper advance, and check status indicator – all on the front face! The VP420 runs from vehicle power with auto ON performance.

“The new VP420 Mobile Printer Series brings convenience, easy paper loading, simple installation, and blazing print speeds (up to 5 ips) to users looking to have a 4” printer easily mounted in their vehicles. We are excited to release the next generation of VehiclePro Mobile Printers that were built off the highly successful VP400 series.” states Chris Yeager, Director of Marketing at Printek, LLC. “The VP420 is just one of many new mobile thermal printers Printek plans to launch over the next year.”

As Printek continues to provide innovative mobile printing solutions for public safety applications, the VP420 Mobile Printer is sure to be the industry standout. To download a brochure on the NEW VP420 Mobile Printer, please visit: printek.com. To view the complete line up of Printek portable printer solutions see:

https://www.printek.com/portable-mobile-printers.html

https://www.printek.com/portable-mobile-printers/portable-mobile-printers-products.html

https://www.printek.com/portable-mobile-printers/portable-mobile-printer-accessories.html

https://www.printek.com/portable-mobile-printers/custom-portable-printers.html

https://www.printek.com/portable-mobile-printers/portable-mobile-printers-service.html

https://www.printek.com/printek-printing-technologies.html

https://www.printek.com/printek-printing-technologies/portable-printers-newsroom-events.html

https://www.printek.com/printek-printing-technologies/corporate-library-archive.html

Via EPR Network
More Electronics press releases

Audio, Audio Components, Consumer Electronics, Electronics, Home Automation, Home Theater, Services, Television

Crescendo Home Theater Opens Location in Los Angeles, Beverly Hills California area

Leave a comment

Beverly Hills, California, 2018-Oct-11 — /EPR ELECTRONICS NEWS/ — Crescendo Home Theater is proud to announce the opening of their Home Theater Installation Company in the Beverly Hills, Los Angeles California area. Crescendo Home Theater has been building home theaters and installing home automation and home security systems for the last 20 years and has developed some great relationships with high-end audio and video companies allowing them to pass more savings on to the customer.

Crescendo Home Theater is known for their keen sense of design and detail when putting together the best home theaters that can be found in any area.

Contact-Details: Crescendo Home Theater
Daniel Karen
9706 Lockford St.
Los Angeles, CA 90035
(530) 400-8869
https://www.crescendohometheater.com/losangeles

Via EPR Network
More Electronics press releases

Electromechanical, Electronics, Electronics & Electrical Components, Electronics & Electrical Instrumentation, Services

LSP Technologies is now filling its schedule for laser peening app development in Europe

Leave a comment

Dublin, OH, Aug-01-2017 — /EuropaWire/ — LSP Technologies (LSPT) is now filling its schedule for laser peening application development in Europe. This landmark opportunity coincides with the impending delivery of LSPT’s Procudo® 200 Laser Peening System to the ZAL Center of Applied Aeronautical Research (ZAL Zentrum für Angewandte Luftfahrtforschung) in Hamburg, Germany. Beginning in 2018, LSPT is making the Procudo® System available to European manufacturers for laser peening research and application development.

Key features of the Procudo® 200 Laser Peening System:

• Production-quality system engineered for high-volume laser peening
• Diode-pumped, pulsed YLF laser delivers high beam quality for consistent processing
• Fastest (20 Hz) and most powerful (200 W) pulsed laser peening equipment available in the world
• Real-time diagnostics and selectable beam parameters for comprehensive process control

“This is the first opportunity for many European manufacturers to access an industrial laser peening system for application and product development research,” said David Lahrman, VP of Business Development for LSPT. “We’re introducing a superior fatigue enhancement solution to the European market, and we’re excited to form new partnerships in pursuit of stronger, more reliable components.”

Laser shock peening (LSP) is a powerful metal improvement process that produces a 10X fatigue life enhancement over shot peening. LSP utilizes a high-energy pulsed laser to generate controlled stress waves that impart compressive residual stresses up to 12 mm beneath the material surface. Laser peening has been proven to significantly extend the service life of metal parts by providing enhanced resistance to common failure mechanisms:

• Fatigue Cracking
• Stress Corrosion Cracking
• Foreign Object Damage
• Fretting Fatigue
• Creep Deformation
• Erosion

Laser peening improves the performance and reliability of metal components, adding value to critical parts across a broad range of industries:

• Aviation and Aerospace – Engine components, turbine blades, bulkheads, wing attachments, landing gear, helicopter components
• Automotive – Axles, drive shafts, valve stems, connecting rods, pistons, impellers
• Medical – Orthopedic implants, replacement joints, spinal fixation devices
• Power Generation – Land-based turbine blades and components, nuclear containment vessels, wind turbine gears
• Manufacturing – Metal forming dies, machine tools

LSP Technologies’ newest laser peening facility will reside in the heart of the Hamburg Aviation Cluster at the ZAL Center of Applied Aeronautical Research. The ZAL TechCenter is one of the largest and most advanced aeronautical research facilities in the world, offering an innovative research space for collaborative development of emerging technologies.

Companies looking to improve the fatigue strength and performance capabilities of their parts should contact LSP Technologies regarding access to the Hamburg laser peening facility. Highly trained technicians will work alongside OEM researchers to develop custom applications addressing specific material performance issues.

SOURCE: EuropaWire

Consumer Electronics, Electrical Test & Measurement, Electronics, Electronics & Electrical Components, Electronics & Electrical Instrumentation, Electronics Design, Services

MK Electric Gives The Ultimate Consumer Unit Design

Leave a comment

Lamp Post Electrical Supplies have built an excellent business by supplying first class electrical equipment, which will completely fit their customers requirements. This has been carried out by using manufacturers who not only supply excellent quality products but also supply good technical advice on the product and its usage. MK Electric is one supplier that fits all these requirements and they are able to supply some of the best consumer units on the market to the exact specification required by the customer.

One example is a standard consumer unit in the MK Electric range which is supplied by Lamp Post Electrical Supplies and this is the MK K7666SP 17th edition consumer unit with basically a 16 way dual RCD (Residual Current Device) set up. This unit can easily be supplied as a single consumer unit with MCB (Mini Circuit Breakers) chosen by the electrician or Lamp Post and MK can supply the advice for the complete specification. If Lamp Post are given the specification MK will design the consumer unit to meet that specification and build it especially within the day for supply by Lamp Post Electrical Supplies the next day. The consumer unit normally requires tailoring to the needs of each individual residence and whilst there are ways in which this can be done just to cover the regulations there are a great number of advantages in setting the systems so that they meet the users exact requirements.

Lamp Post Electrical Supplies can supply excellent advice along with a full range of equipment in the MK Electric Consumer unit range and they are proud to represent one of the major manufacturers of the electrical protection and power distribution systems. The MK K7666SP 17th edition consumer unit is a basic unit but the consumer unit can be used as a standard system with a dual RCD protection system covering a full range of MCBs but it is often better if some of the outlets are covered in different ways and Lamp Post Electrical Supplies can assist with all the requirements.

There is a superb range of MK Electric RCD systems that range from block units to individual circuit units. There are a range of RCBO units which usually control just one circuit. This is ideal for consumer units where the household or office want total protection but it really is essential for the individual circuits, which provide power to the safety or certain essential services. This is usually circuits such as fire and burglar alarms and equipment like freezers and refrigerators, which require secure power supplies wherever possible. There are RCBOs which can turn off with say a power cut and not turn back on when power is restored but in most cases these should be avoided in favour of the type that restore power to the circuit when power returns. There is also a range of DIN rail mounted time switches that can be fitted to meet specific remote power requirements.

Lamp Post Electrical Supplies is pleased to supply any of the MK range and if the item is not on the web site an email or a telephone call will resolve the problem.

 

Via EPR Network
More Electronics press releases

Consumer Electronics, Electronics, Home Automation, Services

My Carpet Pal Rotovac 360i Turning Heads Everywhere!

Leave a comment

The carpet cleaning industry has really come a long way since the invention of the first hand held carpet cleaner in 1956 invented by Mr. Harry Rench, CEO and founder of Rench Manufacturing Company. The first designs had some very evident limitations that Mr. Rench tried to fix and improve the drycleaner’s for carpeting. The vacuum had a very nice appealing look to it and was equipped with an electric cord. Most people at the time couldn’t afford to buy these newly invented cleaning machines and Mr. Rench rented the cleaning machines out to people wanting to clean their carpets. It was like a dream come true for most people with carpeting in their homes.

Over the years, the carpet cleaning machines has gotten a lot better and with the technology of the twentieth century; Mr. Rench’s ideas of carpet cleaning has taken off to a whole new level of carpet cleaning. One of the concepts that really helped the carpet cleaning industry become the great industry that it is today is the advent of the portable extractors and later the truck-mounts. Prochem industries are one of the major leaders today in the technology of carpet cleaning using the truck mounting delivery system. Practically, all of the carpet cleaning professionals today use truck-mounts with the jet spraying system.

Mr. Steve Allison invented the first carpet cleaning wand which he referred to in his patent applications to a method and apparatus for cleaning and rinsing carpets. This was actually invented in 1991 and assigned with the United States Patent Office. Mr. Allison invented a wand that could actually clean and dry the carpet at the same time which was really unbelievable at the time. The concept of the wand was like washing your clothes and drying them in the same machine; it was truly another big breakthrough in the carpet cleaning industry. The wand actually helped to revolutionize the carpet cleaning industry and it is still a major force of the carpeting business today still while we talk at this moment.

Since the invention of the carpet cleaning wand; several companies have industrialized the wands – making them lighter and with better water jets. Prochem has one of the best carpet cleaning wands today on the market with their six (6) jet titanium light weight wand which sell for about $1,299.00 retail. These new revolutionary carpet cleaning wands are a carpet cleaners dream come true. Now there’s a new kid on the block and it was invented by Mr. Cliff Monson called the Rotovac 360i and the Hyrdamaster RX-20. These rotary giants have taken carpet cleaning and steam cleaning to an entire new level in the cleaning business.

The Rotovac carpet cleaning machine is an excellent tool for carpet cleaning. The machine delivers effortless, self-propelled cleaning with the touch of a hand. The rotary heads thoroughly deep clean carpet with hundreds of multi-directional movements. The 360i is light weight at only 39 pounds and super easy to operate. The Rotovac is definitely turning heads in the carpet cleaning business and the companies using this technology will do a better job cleaning your carpeting in general. There is no comparing the wand and the 360i Rotovac. Simply put, if you want your carpet cleaning company to really turn your head with their cleaning habits; chose a company that use the Rotovac technology for standard carpet steam cleaning procedures.

The history of carpet cleaning and carpet cleaners is very unique. My Carpet Pal residential and commercial cleaning company have invested a lot of time and resources in advance technology and cleaning tools in general. We use only the best tools and provide the best services for your home and business cleaning needs. Our company is located in Southern California but we are in the process of expanding our services daily. Everybody knows that the wheel doesn’t have to be re-invented in order to move you from one place to the other. That’s why we are not trying to re-invent the wheel, but, we are trying to re-invent how we can clean your home or business with maximum speed and effectiveness. We are looking to provide you outstanding service with a smile.

My Carpet Pal is one of the leaders in using high quality technology in the carpet cleaning business. We are ready, willing, and able to go the extra mile for you and your love ones; every step of the way. Our technicians are uniformed and well trained in the residential and commercial field and cleaning industry in general. There are no gimmicks, no tricks, no schemes or false advertising to worry about; just good old fashion hard work and caring customer service and support. You can learn more about our company on line or you can read about us. The history of the carpet cleaning business is very interesting and there are hundreds of dedicated people who have spent there lives trying to make your home better for you! This article was written and researched by Mr. Billy Earley.

Via EPR Network
More Electronics press releases

Circuits, Electronics, Electronics & Electrical Instrumentation, LED, Lighting, Services, Switchgears, Wireless, Wiring & Accessories

Lamp Post Electrical Supplies Light Up With Wylex Consumer Units

Leave a comment

Lamp Post Electrical Supplies now stock a fantastic range of electrical goods for supply to the power distribution business and the Wylex range of products are great example of just how good that range is. Wylex are particularly noted for their range of high class consumer units and the quality belies the fact that they are extremely competitively priced and of a major significance to the market place. Lamp Post Electrical Supplies can supply the full range of Wylex consumer units and if the user cannot find what is required on the internet then a simple phone call to the company will get the full details of the range of the products and also give a delivery date. Invariably the products can be supplied off the shelf.

The Wylex consumer units are extremely well made and the choice of units is almost too large but this market place is difficult as there are so many different requirements and Wylex and Lamp Post Electrical Supplies are pleased to be able to supply all the differing needs.

One of the most pleasing things from the point of view of Lamp Post Electrical Supplies is that the Wylex consumer units now have so much versatility built into them. All of the Wylex consumer units conform to the 17th Edition regulations and all new consumer units are fitted to these regulations but Wylex have moved on and offer the user the ability to introduce a far greater degree of protection than the regulations require. The Wylex consumer units can be either a split load system where certain circuits are ganged together with each gang to be protected by a Residual Current Device (RCD) or they can be individually protected circuits with an RCD on each or more preferably a Residual Current Breaker with Overload Protection (RCBO) micro circuit breaker on each circuit. The RCD protects against current leakage to earth and the RCBO protects against current leakage to earth and also overcurrent conditions as well. The idea that every circuit is individually protected by an RCBO is something that Lamp Post Electrical –http://www.lamppostelectrical.co.uk – is very keen to promote. The savings in injury and death from electrocution cannot be underestimated and is worth the effort and expense, although the expense is not at all large.

Via EPR Network
More Electronics press releases

Battery, Circuits, Consumer Electronics, Control Systems, Electrical Test & Measurement, Electromechanical, Electronic Components, Electronics, Electronics & Electrical Components, Electronics & Electrical Instrumentation, Lighting, Power Supplies, Services, Transformers & Inductors, Wireless, Wiring & Accessories

Lamp Post Now Stock Full In-Line Manrose Extractor Fan Range

Leave a comment

Lamp Post Electrical supply all electrical equipment for the power circuits of the house and office and the Internet has allowed them to build a great business, which supplies the market at prices which are well below those of the standard retail outlets. Their typical website is both informative and descriptive so that a good idea of the product can be quickly gained. Any further information can be gained by e-mail or phone. The delivery service is what the customer wants it to be, but Lamp Post Electrical prides themselves on getting the goods quickly and safely to the customer.

The extraction fan business has become more and more complex over the years as the pollution rules and regulations have become stronger and this will change still further in the next few years as environmental and social conditions become stricter. The rules on extraction fans for the bathroom and washroom areas have always been strict because of the danger of water and electricity mixing and passing electrical currents to earth. The introduction of the 17th edition RCD controlled circuits has helped matters, but most installations still use off site extractor pumps to get rid of the unwanted steam and smells.

Lamp Post Electrical have supplied the Manrose CFD200T in line extractor fan for some time and it is a very reliable piece of equipment. The pump works on a typical 4 inch diameter extraction tube that connects to the waste exit of the bathroom to the extraction fan itself. The power of the extractor fan is such that it extracts some 85 cubic metres per hour very quietly and continuously. The fan is fitted in lime and into the line and extraction is not a problem as it will deal with all the typical problems that bathroom extractor fans may have during their normal operation. It should clear away all steam developed by the shower or the bath and leave the room dry, it will also remove obnoxious smells.

Lamp Post Electrical supply all the fittings and fixtures for the operation and the only real problem is where to fix the extractor fan into its final position as this obviously needs to be outside the bathroom. It can be fitted below the floor or above the ceiling but there will be a need for a suitably sized space and also the requirements in the case of an emergency so that future access may be possible to repair or replace easily. All that then remains is a suitable access for the extracted gases to be passed outside of the building through a tube and grill. If there are no suitable access routes then there are some extractor fans which can work in the bathroom or wash room environment without the need for the ultimate protection but these must be mounted so that they cannot be reached when standing in the bath or shower.

Via EPR Network
More Electronics press releases

Electronic Components, Electronics, Services

Line Generators for Machine Vision Offer Improved Performance

Leave a comment

Coherent Inc. (Santa Clara, CA) has introduced a new range of diode-laser based line generators which deliver enhanced flexibility, unique output optimization capabilities, and extended lifetimes. This series of new line generators, called the StingRay, will enable the construction of faster and more accurate machine vision systems that utilize 3D triangulation. The   StingRay series mates a diode laser with high performance electronics and precision, refractive optics for collimation and line generation covering the widest available range of fan angles. They also incorporate optional diffractive elements for creating complex output patterns.  StingRay models are available with output powers as high as 200 mW and at key wavelengths throughout the 450 nm to 1550 nm spectral range, including the popular 450 nm, 520 nm, 635 nm, and 660 nm lines.

StingRay lasers are the first to feature an industry leading, line intensity non-uniformity down to ±5% in a standard product. This high uniformity reduces the need for image post-processing, and translates directly into increased measurement speed and dimensional accuracy. StingRay lasers are also unique in offering external user focusable optics, which allow the laser line to be precisely optimized for the exact distance over which it is projected.  Additionally, the StingRay’s optomechanical design permits “dynamic line balancing,” enabling simple correction of any intensity bias in configurations where the laser must be used at off axis illumination angles. To further enhance usability, Stingray lasers also include an internal “health monitor” that indicates when a diode module is approaching end of life, thus allowing for planned replacement, and avoiding production downtime due to an unexpected failure.

Consumer Electronics, Electronics, Services, Wireless

Museum Uses Lilitab iPad Kiosks to Engage Visitors

Leave a comment

As part of “The Sound of Sax” exhibit, The Museum of Making Music has installed several Lilitab iPad kiosks to share videos and sound clips to entertain and educate visitors about the process of music creation. The Lilitab kiosks contain headphone mounts on the stands, providing enhanced sound and improved visitor interactions.

“It was a great solution”, says B.J. Morgan, Marketing Manager at The Museum. The iPads® remain fully charged when plugged into an outlet using the integrated charging cable in each stand. Kiosk set-up is quick and easy; just attach an iPad, secure the head unit, and plug in the power cord.

Installing different home button access face plates regulates visitor interactions; full web access, a single site or specific application can be configured for varying visitor experiences.

Temporary installations are easily managed with the lightweight and portable Lilitab kiosk. The modular design of the mounting solution provides for several types of visitor stations: wall mounted, surface mounted, tabletop or floor stand.

Full ADA compliance assures the Lilitab provides easy iPad® interactions for wheelchair visitors.

The Lilitab iPad enclosure head unit securely locks the tablet in place. Every mounting solution has the option to be bolted or cable-locked to the floor or other fixture. Integrated into the Lilitab design from the very beginning, museums can be sure their iPad® resources are safe in public venues.

The Lilitab iPad kiosk is versatile, modular and easy to customize. The Lilitab Tabletop turns any desk or table into a self-service station with quick installation; the Lilitab Surface is for a more permanent solution for a wall or counter. Keyboard and printer shelves are also available as added accessories. Optional banners to promote special events or seasonal activities enhance the visitor experience even more.

The Museum of Making Music, founded in 1998 by the National Association of Music Merchants (NAMM), was developed to showcase and celebrate the music products industry. The Museum provides opportunities for cultural enrichment while preserving our musical heritage through special exhibitions, innovative concerts and educational programs aimed toward a wide range of audiences.

Lilitab is a group of designers, engineers & business people passionate about the use of tablet computers in public-use environments. With their compelling interface, compact form-factor and economical price-point, there are all kinds of new and unique uses for putting interactivity into the public space. Additional applications from Lilitab include aniPad credit card reader and iPad ID scanner.

Founded in 2011 by Adam Aronson, an award winning kiosk designer, Lilitab is committed to delivering the most secure, functional and stylish security enclosures for ANY tablet. Adam has been designing custom kiosk enclosures for public-use environments since 1994 in San Francisco.

Museums can engage visitors using the affordable and sleek Lilitab iPad kiosk.

Via EPR Network
More Electronics press releases

Control Systems, Electrical Test & Measurement, Electromechanical, Electronics & Electrical Components, Services

Copper Electric, Ohio & Kentucky’s Premium Electrical Contractor, Celebrate 65 Years in Business

Leave a comment

It all started 65 years ago, with one employee and a few clients. Now, over six decades later, Cincinnati-based Cooper Electric enjoys a healthy business, with service vans spanning two States.

The company are now seen as one of the country’s top service-based electrical contractors for the residential, commercial and industrial sectors – including their flagship Thermographic inspection service.

They still pride themselves on their core values – quality, value and service. Strict standards are maintained, including the answers on their phones twenty four hours a day, and a requirement for each of their experienced on-site staff to have completed a minimum 4-year apprentice program. So, if your Thermographer requires inspection, you can guarantee it will be attended to promptly.

As the company’s management team explain, the key to their success has been the value they base on every one of their clients:

“Using the highest ethical standards, we promise to provide the best electrical solutions for our customers through QUALITY, VALUE, and SERVICE. We strive to implement a long term relationship with our customers, based on safety, prompt service, and anticipating our customer’s needs. To guarantee our QUALITY, we will continually invest in training and education for our work force, and will never knowingly violate the standards of the National Electrical Code” they say.

The biggest pride-call for Cooper Electric is their client return rate, which currently sits at well over 70%.

“That in itself is a testament to the importance we place on everyone we serve. We’d like to thank everybody for a wonderful first 65 years in business, as we excitedly look forward to 65 more”.

Via EPR Network
More Electronics press releases

Electronic Components, Electronics, Electronics & Electrical Components, Electronics Design, Household Appliances, Semiconductors, Services

Pounce Consulting Announces Its New Strategic Alliance With AMD

Leave a comment

Pounce Consulting Inc. has announced today the strategic alliance with AMD (NYSE: AMD) to develop an Embedded Platform Board for the AMD Embedded G-Series platform. Pounce Electronics division will be in charge of the entire design and manufacturing of the board, in its own manufacturing facility.

The main goal of this project is to enable embedded solutions based on the AMD Embedded G-Series platform. This board will help develop engineering solutions, software and hardware, allowing direct access to every I/O feature available from the AMD platform, a robustness which is rarely accessible or available on standard off-the-shelf PC motherboards.

This board is aimed at providing a target platform for embedded customers using the Sage Electronic Engineering integrated development environment (IDE), a high performance development tool that helps embedded developers achieve a quicker time-to-market. This board design will take advantage of AMD’s special interconnect for a custom carrier board, which means that it will allow a low cost direct connection to a secondary board, enabling developers additional easy customization in their designs.

“Development boards are a key support component for the embedded market,” said Buddy Broeker, director, Embedded Solutions, AMD. “With Pounce Electronics, we’ve found a highly qualified and creative technology partner whose new AMD Embedded G-Series-based board will offer design support for each key feature of the platform.”

The Mexican Government, through the Ministry of Economic Development of the state of Jalisco, will be joining forces alongside Pounce and AMD in this project. The government will provide some of the funds necessary for this development in an effort to increase the investment and participation of electronic companies, such as AMD, in the country.

Via EPR Network
More Electronics press releases

Audio, Consumer Electronics, Electronics, Household Appliances, Services

Discount Codes For Currys, UK’s Foremost Electrical Retailer

Leave a comment

Currys (currys.co.uk) Currys are UK’s foremost electrical retailer. With Curry’s you can Shop online for the best deals on everything from Washing Machines and Dishwashers to Sat Navs and Cameras.

Appliances are a necessity in life but that isn’t an excuse for you to have to pay a lot of money for them. It may surprise you to learn that the high prices don’t come from the manufacturers. They are the result of mark ups from the retailers. This is how Currys is able to offer you the same top brand appliances that other places offer but at a price that is considerably lower.

You can save money when shopping at Curry’s by using Currys Discount Codes.

The kitchen is a location where you may be spending lots of time. Making great meals can be faster and even fun though when you have the right appliances on your side. You can give your entire kitchen a great make over too with a new stove, refrigerator, and dishwasher. If you like to buy items in bulk to save money then a freezer may be the one appliance you can really benefit from right now.

Via EPR Network
More Electronics press releases

Consumer Electronics, Control Systems, Electronics, Home Automation, Sensors, Services, Video, Wireless

Security Camera Warehouse’s Q3 Revenue Doubles

Leave a comment

Security Camera Warehouse, a leading CCTV system and surveillance equipment provider, today announced that Q3 2010 revenue is up by more than 100% when compared to the corresponding period a year ago. Both SCW, LLC customer base and the average order size have increased when compared to it’s position last year. Security Camera Warehouse momentum has continued quarter over quarter for the last year and half when it’s management changed.

Under previous management, Security Camera Warehouse offered security cameras and CCTV DVRs from one brand only. SCW, LLC has reinvented itself and now offers many new product lines including analog security cameras, IP security cameras, access control, locks, metal detectors, and security keypads.

In addition, SCW has gone from representing one brand to offering products from many different manufacturers including GE, Pelco, Sony, Speco Technologies, Honeywell, JVC, Toshiba, Everfocus, Vivotek, Vitek, Lockey, Baran, and Risco.

Via EPR Network
More Electronics press releases

Consumer Electronics, Electronics, Printers, Services, Telephone

Friends Business Source (Copier Division) Acquired By Perry Corporation

Leave a comment

Perry Corporation today announced the acquisition of Findlay, Ohio based Friends Business Source (Copier Division). Barry Clark, President of Perry Corporation said, “With this acquisition Perry Corporation expands its leadership position within the office technology industry.

Our Employee Owners view this growth and expansion as validation of their performance and efforts through these difficult economic times. We are growing and increasing our presence throughout northwest central Ohio, southern Michigan and western Indiana.” He also stated, “This continues are aggressive expansion strategy and we expect a seamless transition for Friends (Copier Division) clients and look forward to building new relationships.”

Via EPR Network
More Electronics press releases

Consumer Electronics, Electronics, Electronics Design, Services

Dadam Design, Winner of the 2008 CES Best of Innovation Award, Enters the American Marketplace

Leave a comment

Dadam Design Associates, one of Korea’s top consumer electronics product design companies won the Red Dot Award and CES Best of Innovation award for 2008. Immediately following, Dadam Design ( www.dadam.com ) was selected by the Korean Government to participate in their international expansion program. Dadam has received a financial grant by the Korean government, as well as premier consultancy by the American Business Alliance, Inc. (ABA.).

Included in this years launch is the rollout of Dadam’s D3 Line of consumer electronics products, two of which won best design at the 2009 CES show.

Dadam Design had to meet rigorous standards of financial and marketplace viability in order to participate in this elite program. The company is a full service product design group with a portfolio that boasts thousands of recognizable designs throughout Asia. “Dadam has designed products for some of the largest companies and their branches in Asia, including, Philips, Intel, Siemens, 3M, Apple, Samsung, LG, KT, Hyundai, Posco, Cowon, Sharp, Huawei, UTStarcom, Haier, Midea, GreatWall, Panda, Amoi, and Yulong.”

Dadam’s expansion into the United States marketplace is a ‘natural next step given our success in Korea,’ claims Kate Lee, Overseas Marketing Director for Dadam Designs. “We are excited to be backed by the Korean government and the American Business Alliance and with the assistance of Jeremy Madvin at ABA , we look forward to impressing our American clients with the innovative designs and professionalism we have shared with our Korean clients.’

Dadam is committed to seamless interactions between their Korean design team and their American clients. They have established a local branch office in the Los Angeles area in order to achieve the high levels of customer service and fast turnaround times that have made them successful in Korea. “We have world class standards” Lee claims “and we intend to show them off.”

Via EPR Network
More Electronics press releases

Electronic Components, Electronics, Electronics & Electrical Components, Electronics Design, Household Appliances, Semiconductors, Services

Pounce Consulting Group Announces The Formation Of Pounce Electronics Inc.

Leave a comment

Pounce Consulting Inc. has today announced the formation of Pounce Electronics LLC., a wholly owned subsidiary with operations in Mexico and the US, dedicated to complement Pounce Consulting Inc. and Pounce Embedded Systems Group, by providing module and turnkey electronic solutions.

Pounce Electronics LLC. will support the industrial, medical and consumer markets with services ranging from quick prototyping, to fully integrated electronic solutions including mechanical and industrial design, which will help its clients reduce their products time-to-market. Some of the initial innovative products include modules to enable smart defrosting for freezers and wireless harness replacement kits for the appliance industry, as well as customized touch sensing interface modules.

Pounce Consulting Inc. has appointed Philip Wener as the CEO for Pounce Electronics LLC.. Mr. Wener has more than 35 years of experience in Sales and Marketing, Production Management and Finance for companies in the Printed Circuit Board, Membrane Switch and Product Identification industries, and he has over 20 years extensive experience working and sourcing with Far East manufacturers.

Mauricio Gomez has been appointed as the Director of R&D for the company. Mr. Gomez has more than 15 years of experience in the semiconductor industry as design engineer, software engineer, applications and system engineer, product management, as well as marketing and engineering management. He developed his career at companies like Motorola and Freescale in Mexico and the USA, gaining experience in the automotive, industrial and consumer markets.

“Pounce Electronics LLC. will operate as an independent organization and will bring a new business perspective and value added services, which will complement our solutions offering. We believe that being able to offer a complete suite of IT, Embedded Design Services and Integrated Electronic Solutions will place Pounce Consulting as a main partner of our clients,” said Roger Viera, Pounce Consulting Inc. CEO.

Via EPR Network
More Electronics press releases

Audio, Consumer Electronics, Digital Portable Player, Electronics, Services, Video, Wireless

DealToWorld.com – Unbelievable Service

DealToWorld.com is an amazing platform especially for the gadget lovers and here one can get a number of attractive gadgets at really surprising prices. The main advantage of using this service is that the shipping is absolutely free. This is the main reason why most people are opting for DTW. It is gaining attention among several people not only in one country but throughout the world. The unbelievable services of DealToWorld amaze the customers and of course it is one of the best services available.

DealToWorld.com - Unbelievable Service

Unbelievable price

The prices offered by DealToWorld are really surprising as one can get free shipping on almost all types of orders. The price range is really competitive and moreover, it provides the cheapest price. There is a huge variety of accessories and apparels and one can choose any one depending upon the choice and interest. DTW has large warehouse through which they supply various items or products directly at the mailing address. The interesting thing about DTW is that the shipping is absolutely free and this is the reason most customers are taking interest towards this amazing online store. Shipping is completely free because they use SingPost Airmail. DTW has partnership with SingPost and this is how they deliver all the orders free from shipping. The SingPost is very fast and one can be assured of delivery within 10 working days.

Via EPR Network
More Electronics press releases